ALL CATEGORIES

Vemar ULTRAFINE Part A + B, Epoxy Filler Antifouling
Previous
Next
Vemar ULTRAFINE Part A + B, Epoxy Filler Antifouling

Vemar ULTRAFINE Part A + B, Epoxy Filler

SKU 45300 + 45304 Category Antifouling
€31.40

ULTRAFINE is a lightweight two-component epoxy filler designed for final fairing and fine surface smoothing on boats and marine structures. It is intended as a finishing filler, especially over coarser fairing compounds such as ULTRAFILL, where it creates a very smooth, uniform and low-porosity surface after sanding. It is suitable for properly prepared substrates including steel, wood and GRP, both above and below the waterline.

Litres
Add to Cart

ULTRAFINE is a lightweight two-component epoxy filler designed for final fairing and fine surface preparation before topcoats. It is developed to create a very smooth and even finish and is ideal as a finishing filler after heavier fairing compounds.

It is especially suitable for application over ULTRAFILL, where after sanding it delivers a smooth, compact and almost pore-free finish. The product is easy to apply and easy to sand, allowing accurate preparation of marine and industrial surfaces.

ULTRAFINE is applied on properly prepared and adequately primed substrates and is suitable for a wide range of materials including steel, wood and GRP. The maximum application thickness per layer is up to 3 mm. The product is used as a two-component system consisting of Part A and Part B that must be mixed before application.

Product type Two-component epoxy filler
System Part A + Part B
Application purpose Final fairing and fine surface smoothing
Type Lightweight finishing epoxy filler
Use area Above and below the waterline
Substrates Steel, wood, GRP and similar substrates
Maximum layer thickness Up to 3 mm
Packaging 0.5 L, 3 L
Part A colour Sand Yellow
Part B colour Off White
Mixture colour Light Beige
Sales format Set of Part A + Part B

You may also like

Previous
Next